Stone fork
PRODUCTIVE AND SERVICE-FRIENDLY
“Pick up and keep”. The distinctive design provides considerable potential
to fill the implement without dropping any of the stones already in the
bucket. Mounted at the front end are hardened tines made of Hardox steel
which point downwards. After many hours of hard work, it is then easy to
replace these tines. The cross tubes (50 x 100mm) stabilize the 30mm
tines. Please also note that the back end of this model is higher that that of
previous models.
Manure fork
MORE STABLE AND MORE RESILIENT THAN MOST
Three advantages make a big difference: Our manure forks have a specially
manufactured bottombeamwith welded sleeves for the tines that will not
be deformed or bent when in use. The tines are fitted before painting the
implement –metal touches metal. The tines are tightened to a very high
torque. All-in-all this gives you an implement with a long service life.
Counter-weight
A SIMPLE WAY TO IMPROVING STABILITY
The counter-weight improves the stability of the tractor/
loader unit. Connection and disconnection is simply done
using the attached coupling shaft.
The counter-weight helps to:
• improve stability and the distribution of weight
• lower the loads on front wheels and axle
• improve ground contact, which in turn improves traction
3-point linkage
MORE POSSIBILITIES
This implement can be used on the tractor’s 3-point linkage
to helpmove implements around the farm. Available with
either Euro or SMS hooks.
STONEFORK
150
200
Width, cm
150
200
Depth, cm
100
100
Height, cm
73
73
Number of bottom tines 14
18
Tine spacing, cm
11
11
Weight, kg
237
296
MANUREFORK
130
150
170
190
230
Width, cm
130
150
170
190
230
Depth, cm
85
85
85
85
85
Number of tines
7
8
9
10
12
Weight, kg
123
136
152
165
203
3-POINTLINKAGE
Weight, kg
78
FORKS AND ACCESSORIES
COUNTER-WEIGHT
Weight, empty Weight, filled (not factory filled)
186 kg
800-1,000 kg, ca 900 kg with concrete
214 kg
1,000-1,300 kg, ca 1,200 kg with concrete
37
