Bale spike
SIMPLE AND EFFECTIVE
The bale spike is particularlywell suited to handling round
bales. The longer tine is used to safely transporting the bale.
The shorter tine stops the bale from rotating.
Square bale fork
- Standard
FOR ROUND AND SQUARE BALES
The Square bale fork is a simple and sturdy implement for
both round and square bales. The tines in the lower box
section can be installed 80 or 130 cm apart. The Square Bale
Forkmay be supplied with a U-shaped Rear extension that
supports the top bale as an optional extra.
The rear extension is a safety device that we strongly
recommend especially if the loader is without parallel linkage
or for tractors without a cab.
Square bale fork - Safety
FOR SAFE AND EFFICIENT HANDLING
The bottombox section of the Square bale fork is hinged and
this is an important safety detail. Firstly you can lock the
tines in the upright position, increasing safetywhen driving,
particularly on public roads. Secondly, the handling of bales
is more effective and safer. When unloading, the bales are
pushed into place using themain frame. If unloading takes
place at full height, the top bale is pushed into place using the
upper section of the implement and without pressing the
long tines into the bale. Therefore there is no risk of the bale
falling back out when you reverse.
The Square bale fork can be supplied with two different
bottom frames. The 190 cmwide frame is suitable for long
large bales. The 140 cm frame is supplied with two tines as
standard, but this may be increased to a total of five tines if
required.
The Square bale fork can be supplied with rear extension (for
handling several bales simultaneously) or with a Bag hook
(for lifting large sacks) as optional equipment. (Maximum
load on the bag hook is 750 – 1250 kg depending on height).
BALE SPIKE
Width, cm
115
Tine length, cm
125
Weight, kg
60
SQUAREBALEFORK–STANDARD
Width, cm
140
Number of tines, std
2
Tine length, cm
82 or 125
Rear extension, weight, kg 42
Weight, kg
78
SQUAREBALEFORK–SAFETY
140
190
Width, cm
140
190
Number of tines, std
2
5
Tine length, cm
125
125
Weight, kg
133
168
IMPLEMENTS FOR BALES
31
